Comments on: NavSpark / XBee Adapter https://mpetroff.net/2014/06/navspark-xbee-adapter/ mpetroff.net Thu, 20 Oct 2016 04:19:49 +0000 hourly 1 By: Andrew https://mpetroff.net/2014/06/navspark-xbee-adapter/#comment-255734 Thu, 20 Oct 2016 04:19:49 +0000 http://www.mpetroff.net/?p=1389#comment-255734 In reply to Matthew Petroff.

I understand. I have figured it out. I am using 9600 Baud. I believe the issue was a proper ground plane on the RF module. Thanks!

]]> By: Matthew Petroff https://mpetroff.net/2014/06/navspark-xbee-adapter/#comment-255726 Wed, 19 Oct 2016 14:28:14 +0000 http://www.mpetroff.net/?p=1389#comment-255726 In reply to Andrew.

I’d have to read the settings off the radios. As it’s also dependent on the GPS receiver settings, you can’t just blindly apply settings.

]]> By: Andrew https://mpetroff.net/2014/06/navspark-xbee-adapter/#comment-255697 Sun, 16 Oct 2016 18:55:16 +0000 http://www.mpetroff.net/?p=1389#comment-255697 In reply to Matthew Petroff.

In rtkrcv (in using linux) for RTKLIB, I do get a data stream, but rtkrcv does not recognize it. If I cat /dev/ttyO4 I do get NMEA strings mixed with some binary streams. If you could post or email me the Xbee settings that would be greatly appreciated. I’m at a stand still until I can get the Xbee’s singing…

]]> By: Matthew Petroff https://mpetroff.net/2014/06/navspark-xbee-adapter/#comment-255694 Sun, 16 Oct 2016 16:01:24 +0000 http://www.mpetroff.net/?p=1389#comment-255694 In reply to Andrew.

They’re both configured with identical wireless settings, with the baud rate matching the GPS modules’ baud rate.

]]> By: Andrew https://mpetroff.net/2014/06/navspark-xbee-adapter/#comment-255692 Sun, 16 Oct 2016 06:00:35 +0000 http://www.mpetroff.net/?p=1389#comment-255692 What are your Xbee settings? I am doing the same thing using the UART pins to Xbees but get not satellite data from the Ublox connected to the Xbee.

]]>